Industry News

Durable Bearing main produce :cast bronze,bronze bushing,dry bushing,plain bearing,sleeve bushing

Expected growth rate of mold industry in 2011 will reach 18% higher

   International Mould & Metal & Plastic Industry Suppliers Association Deputy Secretary-General Luo Baihui recently said that as the global economic recovery, rapid industrial development of mold, mold industry this year to achieve higher growth in 2011 will be in a stable development of mold industry and are expected there will be 18% growth,cast bronze so the mold industry, the total demand for steel will continue to rise.

...

Failure of large compressed air system solutions to common parts

   First, maintenance and measure.

   (1) filter dirty air filter is often the problem occurs because the air filter dust is filtered down. When the compressor may be dusty days of continuous operation, the importance of timely monitoring of dust situation.cast bronze Usually in the pipeline before the gas enters the air compressor installed on the pressure meter to monitor the inlet air pressure relative to atmospheric pressure, pressure filters to T inches that have been dirty and must be addressed. In order to reduce operating costs,bronze bushing and its approach is to filter removed, using compressed air and then put back to use a clean sweep. However, after the filter easy to purge the bad times can not be used, must be replaced with new filters. Since the new filter is imported and expensive, dry bushing often high cost of replacement operation. Therefore, domestic production instead of the same type of filter products, filter the results with the same effect as imported products, and the price is several times cheaper.plain bearing Greatly reduce the cost of production which in turn implements the filter equipment at home.

...

Secretary for Development and Reform Commission held in industry demand for steel research seminar

    To grasp the steel industry, cast bronze consumer demand for steel products, good demand forecasts of steel consumption in China, recently, the National Development and Reform Commission Secretary and the China Iron and Steel Industry Association in Beijing organized the demand for steel research forum.
...

Gear pump in the production of plastics and rubber

    Since 1978, the gear pump to be applied to thermoplastic extrusion line, the most typical application areas of several plastic producers,cast bronze plastic molding, cast film or blown film.
...

"Basic research, high-performance bearings," 973 project started

    National Basic Research Program "High-performance bearings for basic research," 973 project start will be December 26, 2010 held at the Xi'an Jiaotong University, Professor Zhu Jianying, Tan Jianrong academicians,cast bronze Lu Bingheng Fellow and Science and Technology, Ministry of Education, Foundation, Xi'an Jiaotong University , ZWZ relevant leaders attended the meeting.
...

Hebei Iron and Steel Stone Steel 2010 profit of 2.2 billion company

    In 2010, after joining in Shijiazhuang, Hebei Iron and Steel Iron and Steel Group Co., Ltd. take full advantage of the company's resource platform and management platform, production and management continue to create a new situation, achieved a sales income of 8.2 billion, profits of 220 million.

...

Policy "to force" equipment manufacturing automation technology favored

    The first high-end equipment industry in China Development Forum on January 8 held in Beijing, the Ministry of Equipment Industry Secretary Zhang Xiang Mu said at the forum,cast bronze by 2015 the overall strength of the high-end equipment manufacturing industry will greatly enhance China's industrial base to meet the transformation and upgrading and strategic development needs of new industries, and to achieve four major goals.

...

Wafangdian "bearings are" creating opportunities for the development of tile City

    Government work report made 'three nuclear wings'cast bronze concept is the function of Wafangdian had a very good position, "Municipal People's Congress Liu Xingwei deliberations in the group, said excitedly.
...

NTN developed a new precision machining spindle with air

    NTN (NTN) has developed a non-contact support using air pressure to the axis of rotation, "ultra-precision machine spindle with air."
    Used mainly for non-spherical lens mold machining and so on.cast bronze As mobile phones equipped with a thin aspheric lens and dimensional accuracy requirements are higher, so the company had previously developed excellent air spindle rotation accuracy. Development of products has begun delivery to some customers,bronze bushing future-oriented components such as processors, to expand sales.

...

2011 package announced in Beijing recommended Awards

    January 10, 2011, the fifth of China's bus industry in China's bus network Readership Survey 2010-2011 Results and Award Ceremony Award in Beijing China Park Hot Springs Hotel, organized by meal, the fifth of China's bus industry in 2011 recommended selection of complementary products The results also will be announced.
...

Page:[«][4][5][6][7][8][9][10][11][12][13]14[15][16][17][18][»]

Calendar

<< 2013-1 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31