Industry News

   International Mould & Metal & Plastic Industry Suppliers Association Deputy Secretary-General Luo Baihui recently said that as the global economic recovery, rapid industrial development of mold, mold industry this year to achieve higher growth in 2011 will be in a stable development of mold industry and are expected there will be 18% growth,cast bronze so the mold industry, the total demand for steel will continue to rise.

   First, maintenance and measure.

   (1) filter dirty air filter is often the problem occurs because the air filter dust is filtered down. When the compressor may be dusty days of continuous operation, the importance of timely monitoring of dust situation.cast bronze Usually in the pipeline before the gas enters the air compressor installed on the pressure meter to monitor the inlet air pressure relative to atmospheric pressure, pressure filters to T inches that have been dirty and must be addressed. In order to reduce operating costs,bronze bushing and its approach is to filter removed, using compressed air and then put back to use a clean sweep. However, after the filter easy to purge the bad times can not be used, must be replaced with new filters. Since the new filter is imported and expensive, dry bushing often high cost of replacement operation. Therefore, domestic production instead of the same type of filter products, filter the results with the same effect as imported products, and the price is several times cheaper.plain bearing Greatly reduce the cost of production which in turn implements the filter equipment at home.

    To grasp the steel industry, cast bronze consumer demand for steel products, good demand forecasts of steel consumption in China, recently, the National Development and Reform Commission Secretary and the China Iron and Steel Industry Association in Beijing organized the demand for steel research forum.
...

    Since 1978, the gear pump to be applied to thermoplastic extrusion line, the most typical application areas of several plastic producers,cast bronze plastic molding, cast film or blown film.
...

    China has a large auto parts market, a huge auto market, the temptation is great. At present, there have been in the auto parts market,cast bronze and brand new business there, behind a large influx of foreign capital.

    In 2010, after joining in Shijiazhuang, Hebei Iron and Steel Iron and Steel Group Co., Ltd. take full advantage of the company's resource platform and management platform, production and management continue to create a new situation, cast bronze achieved a sales income of 8.2 billion, profits of 220 million.

    Recently, Wafangdian Bearing Group Co., Ltd. (hereinafter referred to as ZWZ) to Jiaxing 9 bearing distributors to report on the court. cast bronze Jan. 17 The author from the South Lake district court learned that the court has accepted the 9 series of cases.

    International Mould & Metal & Plastic Industry Suppliers Association Deputy Secretary-General Luo Baihui said recently,cast bronze as the global economic recovery, rapid industrial development of mold, mold industry this year to achieve higher growth in 2011 will be in bronze bushing a stable development of mold industry and are expected there will be more than 18% of the growth of mold industry, therefore the total demand for steel will continue to rise.

    Rolling in the course of external conditions, because of their quality and the reasons for its carrying capacity, cast bronze precision and wear resistance of such rotation will change. When the bearing performance requirements can not be less than the normal working hours.
...

    National Basic Research Program "High-performance bearings for basic research," 973 project start will be December 26, 2010 held at the Xi'an Jiaotong University, Professor Zhu Jianying, Tan Jianrong academicians,cast bronze Lu Bingheng Fellow and Science and Technology, Ministry of Education, Foundation, Xi'an Jiaotong University , ZWZ relevant leaders attended the meeting.
...