Industry News

         China's bearing industry to effectively respond to the tremendous impact of the international financial crisis, from the steady DU bushing rise of the second half of 2009, out of the woods.

Maintenance of laboratory equipment, centrifuges and operating principle
  A centrifuge maintenance:

 1, the machine is activated, if abnormal situation must stop checks, if necessary, repairs need to be washable.

 2 is a high DU bushing centrifuge work, so the body must not touch the drum, to prevent accidents.

   Recently by the media burst of soybean milk, food processing machines and other appliances in direct contact with food products using the oil problem, affecting the nerves of consumers and producers. For a long time people on food hygiene and safety concerns and increased emotional confusion broke the news of this type of explosive.

  In recent years, widely used in aerospace technology in the ceramic thin film coating technology began to be used car. This technique has the advantage of better insulation and can withstand high temperature and high pressure, process maturity, quality and stability. To achieve the goal of low-heat, the engine combustion chamber can be sprayed ceramic components, such as zirconia spray piston, cylinder liner sprayed zirconia. DU bushing After this processing engine can reduce heat loss, reduce the quality of the engine itself, reducing the engine size, reducing fuel consumption.

  Recently, someone broke the news: "commercially available soybean milk, fruit juice machines, which are used in industrial lubricants, food grade lubricants are not, because of low prices. Exported food with a certain level as long as there are parts per million leakage, it may pose a threat to security.brass bushing "This statement caused concern in the community. To this end, the author interviewed in the domestic soybean milk, fruit juice machine on the market account for a large share of the nine-yang, the U.S. company and related experts and scholars, as well as the management.

  Recently, one of "the domestic market, sales of soybean milk, fruit juice machines are used in industrial lubricants" broke the news in the market, raised a storm, although the small appliance industry's leading enterprises and the United States have issued statements Joyoung denied broke the news content, saying that exposure to food-related products and components are food grade materials related to national security requirements, yet to be fully market and consumer confidence, consumers purchase these products on the sidelines, the relevant market company's DU bushing share price fell, small household appliances market why trust so fragile?

Many in the start of the JiShou agricultural engine, open the throttle started, and ignore the engine starts before the crankshaft idling. Open the throttle started the stillness of the engine, especially cold car, the axis and bearing the oil flow has between all off, the axis of the bearing surface onto brass bushing bearing, if the suddenly in the shaft bearings inside the rotation, will produce dry friction (metal and metal directly friction) or half dry friction, make each axis and bearing and other sports a speed up, even can arise "wear holding shaft" accident. So the engine before initiating must first cranking plain bearing a moment, until the oil pump started to work, and the oil, every word oil filled with axes and bearing a small amount of oil into between the friction surface again after the start, plasic bushing you can avoid "holding shaft"Mould guide plate accident, and can greatly extend the life of the hijackers hair.

In order to face the exhaust the throttle control car motor and ExhaustGasRe-circulationSystem EGR (the motor problems, Japanese seiko NSK import bearing developed low torque grease of seal bearing.

Usually, in order to reduce torque,DU bushing are in the motor assembly as director of the rotation, to reduce the initial resistance, grease, the viscosity of the ingredients reduce oil. But, this kind of practice Mould guide plate is the key problem of not only break-in rotation is time-consuming, and reduce the oil viscosity, under high temperature when using can shorten life. Therefore, the Japanese seiko corporation through addition of grease in nanoscale particles to reduce resistance grease. That way, compared with the original,plasic bushing not only can more quickly, and even if bearing stable torque in high temperature can keep a long life.

Summer is the fault of the compressor produce peak, "INA" import bearing compressor bearing of overheating very common, "INA" bearing in the work more than normal temperature causes a very DuoZhong, out of the compressor itself, the reason of the cause of the compressor bearing overheatingDU bushing and the following kinds:

Taiwan HuangTai planner in micro bo crush on yuan available on the market of juice: machine, DouJiangJi motor all use industry lubricant, not food grade lubricantbushing as long as there is one over ten thousand of the leak, there may be a threat of consumer health. Affected by this. And yesterday (September 8,) DouJiangJi leading shares JiuYang shares tumbled 4.13%, at 11.37 yuan, and nearly a month to their biggest one-day drop. Reporters call beauty, east KaiQin, HuaDi OS and a number of shunde, zhongshan area DouJiangJi enterprise, its are used in food oil is said. The night (September 8) 9 have DouJiangJi sleeve bushing the industry has revealed that the use of the existing industry lubricant, DouJiangJi lubricants would no DouJiangJi infiltration within within the technical department, to be verified.