DNB02 Solid lubricants-embedded special High-Strength-Brass bearing-DU BUSH, spring bush, bronze bushing, SLIDING BEARING, CHINA BEARING, THRUST WASHER, THRUST WASHER, needle bearing

HOME > PRODUCT

PRODUCT

Excellent wear resistance and high load carrying capacity DNB02 owns higher mechanical strength and hardness than DNB01. It's based on the special High-Strength Brass alloy and solid lubricants are embedded therein. l Broadly used for higher load application than DNB01. l Exert excellent wear resistance under high load, low velocity operation.
Features	lApplicable to higher loads than DNB01 lOutstanding wear resistance when used at areas of high load and low velocity

Values in()are of static allowable pressure.

Indicates static allowable pressure either without sliding or when sliding with extremely low velocity less than 0.0017m/s {0.1m/min}.

* Values above are of when SL1 is used as solid lubricant.

Mechanical Property
Density	----------	g/cm³	7.8
Tensile strength	JIS Z 2241	N/mm²{ kgf/mm²}	785{ 80}
Tensile break elongation	JIS Z 2241	%	10
Compressive strength	----------	N/mm²{ kgf/mm²}	390{ 40}(Note 1)
Hardness	JIS Z 2243	----------	HB235
Modulus of longitudinal elasticity	JIS Z 2241	N/mm²{ kgf/mm²}	98000{10000}

* Values above are nominal values,not standard values.
(Note 1) Compressive proof stress:0.1%

【CLOSE】