Suitable for low/middle load, middle velocity application
#500F is oilless bearing material, based on cast iron base with solid lubricants embedded therein.
l Self-lubricated and maintenance-free, suitable for low/middle load, middle velocity application.
l Exert excellent wear resistance where it's difficult of lubricating film to be formed during reciprocating, oscillating or frequently intermittent operation.
lIt's a cost-saving solution compared with copper alloy based bearings
|
| Features |
| l |
The self-lub bearing performs great for low and middle loads and low velocity operations |
| l |
Excellent wear resistance at locations where proper oil film is hard to be formed due to reciprocating, intermittent or oscillating motion |
| l |
Cost lower than bronze alloy base bearing's |
| l |
Available in standard products with various sizes |
| |
| Service Range |
| Lub state |
Oil free lub |
Periodical lub |
| Service temperature range¡æ |
-40~+400 |
P max.
N/mm2{ kgf/cm2} |
5(73.5)
{ 51(750)} |
8(73.5)
{ 82(750)} |
V max.
m/s{ m/min} |
0.15{ 9} |
0.25{ 15} |
PV max.
N/mm2¡¤m/s
{ kgf/cm2¡¤m/min} |
0.50{ 306} |
0.80{ 490} |
| Values in ( ) are of static allowable pressure. |
Indicates static allowable pressure either without sliding or when sliding with extremely low velocity less than 0.0017m/s {0.1m/min}. | |
| Mechanical Property |
| Density |
---------- |
g/cm3 |
7.1 |
| Tensile strength |
JIS Z 2241 |
N/mm2 {kgf/mm2} |
150{15} |
| Compressive strength |
---------- |
N/mm2{kgf/mm2} |
440{45} |
| Impact strength |
JIS Z 2242 |
J/cm2{kgfm/cm2} |
1{0.1} |
| Hardness |
JIS Z 2243 |
---------- |
HB160 |
| Modulus of longitudinal elasticity |
JIS Z 2241 |
N/mm2{kgf/mm2} |
78,000
{8,000} |
| Coefficient of linear expansion |
---------- |
¡Á10-5¡æ-1 |
1.2 |
| Thermal conductivity |
---------- |
W/m¡æ{cal/sec¡æcm} |
50.2
{0.12} | * Values above are nominal values, not standard values. |
| Test data |
 |
| Plane reciprocating motion test |
| TEST conditions |
| Dimensions of specimen: |
 40¡Á40¡Át20 |
| Mating material: |
FC250 ground |
| Load: |
5.9N/mm2 {60kgf/cm2} |
| Velocity: |
0.12m/s {7m/min} |
| Stroke: |
80mm |
| No. of reciprocations: |
100,000cycle |
| Lubrication: |
Initial greasing only | |
|
Standard Product INDEX
|
Copyright © 2008-2009 JIASHAN B&B ELECTRIC & MECHINERY CO.,LTD Technic sustaining