MP14 Hydraulic oil cylinder special bushing-DU BUSH, spring bush, bronze bushing, SLIDING BEARING, CHINA BEARING, THRUST WASHER, THRUST WASHER, needle bearing

Construction

Concrete Conveying Pump

Garbage Truck

Forklift

Wind Energy

Petroleum Industry

Automatic production line

harbor machinery

HOME > PRODUCT

PRODUCT

MP14 Hydraulic oil cylinder special bushing

Features

1.PTFE with oil fibre can protect the shaft,while machine in operation.
2.It is of low friction coefficient,anti-wear.
3.Good running in property.
4.It fits well in motion of circumrotation,sway and to-and-fro.
5.It can be used in food machine,pharmaceutical machine etc.due to lead-free.
6.Besides the same function of MP10 in particular fits frequently reciprocating motion with a high side force, it is widely used in automobile,motordamper and oil pumps etc.

MP14 Hydraulic bushing is developed on the basis of MP10 and meanwhile considering the motion way of oil pump and damper.it is the substitute of and parallels in performance with abroad DP4.In addition to covering the same usage of MP10 in particular fits frequently reciprocating motion with a high side force.It is a tendency to gradually replace MP10,the latter will Cocer a Wide application in auto mobile,motor damper and oilpumps,etc..

Tech. Data
Max. Load	Static	250N/m㎡	Friction coefficient		0.03-0.20
	Very low speed	140N/m㎡	Max. speed	Dry running	2m/s
	Rotating oscillating	60N/m㎡		Hydrodynamic operation	＞3m/s
Max. PV dry running	Short-term operation	3.6N/m㎡*m/s	Thermal conductivity		42W(m*K)^﹣1
	Continuous operation	1.8N/m㎡*m/s	Coefficient of thermal expansion		1110^﹣6K^﹣1
Temp. limit		-195℃~+280℃

【CLOSE】