Industry News

   Cold weather, the mobility variation of fuel, lubricating oil viscosity increase of cooling water is easy to freeze, cast bronze to the use and maintenance of agricultural machinery has caused many difficulties. Of agricultural machinery in the winter if stored properly will shorten the life of agricultural machinery.
...

   1, for the radiator cooling air channel between the chip is dust, Clipping and blocking coverage of issues, cast bronze should take the following measures:

   ⑴ change the location of cooling air imports. Currently small and medium wheeled tractor engine from the tractor front-end cooling air is inhaled into the tank by cooling fan radiator. Harvest operations, bronze bushing cut front-end as cutting, conveying raised dust, clippings and other debris easily through the front of locomotives to be bothered by the wind shield tank cooling chip. In order to change this situation, we must try to change the import location of cooling air, so that the air inlet above the tractor front cover, so the dust cutting table, dry bushing Clipping for easy access to the radiator, the delayed effect of elevated water temperature.

    Recently, Shanghai Electric) total investment of 500 million yuan in the efficient and clean large wind power bearing production line technological transformation project completion and operation of the first units of 3.6 MW offshore wind power bearing off the assembly line,cast bronze marking the Shanghai Electric is a world-class wind power bearing independent R & D and manufacturing capabilities.

    For many users choose to shower room simple shower room to buy. Shower room then choose how we should distinguish what is good or bad.

    1, cast bronze knocking material.

    November 26, U.S. Department of Commerce (DOC) announced its decision to postpone its second in China for the origin of tapered roller bearings and parts (finished and unfinished) of the 2008-2009 review of the final ruling of anti-dumping tax deadline .

    December 2001, China officially became a WTO member. When the market fully open the door, only to liability ratio of more than half of China's state-owned enterprises and private enterprises to compete is still raging in Neonatal and to the world top 500.
...

    November 30, 2010 morning, the German Machinery Industry Federation (VDMA) Chief Representative in Beijing, Ms. Fen Ke butterfly, the project manager Mr. Cao Guohong, visited China Bearing Industry Association,cast bronze when Liu En chairman, Wang Quanqing Secretary-General, Deputy Secretary-General Zhou Yu met with German guests.

    Yokogawa bearing industry began in 1984, after the rapid expansion of bearing manufacturers, cast bronze only to Yokogawa town fortune teller in the village brought together more than 200 kinds of bearing manufacturers.
...

    December 10, the reporter learned from ZWZ, but also supporting a number of major equipment for the country's high-end bearing products successfully produced here, cast bronze to fill the gap: 5 MW wind turbine pitch bearing sent to the user installed.
...

    Past three decades, with the strong development of the manufacturing sector, fastener manufacturing industry as an indispensable basic pieces of the chain, also made considerable progress.
   cast bronze According to statistics, nearly 20,000 fastener manufacturers, and its contribution to economic development is obvious.

...