November 26, U.S. Department of Commerce (DOC) announced its decision to postpone its second in China for the origin of tapered roller bearings and parts (finished and unfinished) of the 2008-2009 review of the final ruling of anti-dumping tax deadline .
The survey period is from June 1, 2008 to May 31, 2009. U.S. Department of Commerce, cast bronze said the deadline for review from December 12, 2010 extended to January 11, 2011.
Fasteners "speed effect" and the "cost effect" weakened.
Past three decades, with the strong development of the manufacturing sector, fastener manufacturing industry as an indispensable basic pieces of the chain, also made considerable progress. According to statistics, bronze bushing nearly 20,000 fastener manufacturers, and its contribution to economic development is obvious.
No doubt that the financial crisis in 2008 triggered by the global economic crisis resulting in the fastener industry, production and operation affected. Especially those export-oriented manufacturing enterprises, dry bushing a sharp decline in business volume, and some manufacturers into three or four per day on weekdays only; some manufacturers lack of capacity to withstand risks, and even can close out hedge. As the financial turmoil further away, from the beginning of the end of 2009, the national strength fastener manufacturing industry has been largely restored. plain bearing This year, the number of fasteners the production situation is quite gratifying, basically to the level of the same period in 2008,sleeve bushing output value of enterprises and even some new growth.
In the "Eleventh Five-Year" period of transformation of economic development has not made substantive progress in the face of "Twelfth Five-Year"DU bushing plan enacted in the context of modern industrial system, the new structure of industrialization process, the fastener industry in fact is the bottleneck period. Currently, many manufacturers of the basic stability of the scale of production,bushing there are few new fastener plant production, is the development of the industry has reached saturation stage? Actually not true.
Explore the what, the main also to present the production of multi-fastener for the low-end products, the production has a tendency to saturation in the production of higher-end products still much room for development. Many high-end passenger cars such as the engine bolts, chassis bolts tires, 60% -65% must be imported. The key is the industry's technology level, technical equipment and production capacity has not yet reached the appropriate requirements.
Automotive manufacturing of standard parts enterprises, one of the few 70-80 at home. Over the past years, brass bushing in addition to more than 40 passed the ISO/TS16949: 2002 "auto parts supplier quality management system" certification,Mould guide plate access to a few varieties of foreign brands of automotive fasteners manufacturing production, the majority of enterprises are still not into the scale of cross- production areas of automotive fasteners, and some can only rely on "OEM" production. The reason is that the production of automotive fasteners with core technology, production capacity and product quality is irreplaceable, automotive fasteners are of high value-added technology-intensive goods,plasic bushing and some industry platform has not yet reached this level.
Today, the fastener industry "in order to speed for the market" and "for using the cost of capital," which is already weakening, the process of development in the past, the main cost of ownership advantages and a lack of core competitive advantages, is a low-cost, low technology extension-type expansion mode; only the ability to create price discrimination, and lack the ability to create product differentiation. This determines the fastener industry, "create" attribute, not "create" attribute. "Big but not strong," lack of core competitiveness of production in the increasingly fierce market competition and deal with economic development and transformation of the situation, many companies difficult to sustain, the fastener business has entered a bottleneck in the development stage, facing new challenges.
The sound development of a fastener, we must establish the company's core competitiveness and develop the inherent power industry, but because the current majority of our fastener business innovation, lack of advanced technology and intellectual property rights of small businesses scarcity of skilled personnel, production team unstable, front line staff without adequate training and mobility of big, complicated business overwhelmed the lower end of daily production or lower end products, the production of passive mode and an unstable market environment. Admittedly, such as human resources are scarce, the absence of core technologies and market expansion fatigue of these endogenous defects, development of the industry will be adversely affected.
Scientific research in the field of fastener technology, which not only failed to obtain the corresponding years of development, but was constantly "marginalized", the entire industry, a serious lack of original research, a considerable number of products in addition fastener tensile test, hardness testing of In addition, there is no metallurgical testing, the impact of performance test and other essential means of testing personnel within the enterprise has not been recognized by national or provincial departments of "quality control officer" job card, and therefore material, heat treatment or mechanical processing associated product quality problems often arise because of not been able to clarify the economic disputes have become a common phenomenon, many companies often due to the material on the steel market, "cohabitation" of bolt and nut performance is not up to frequent accidents, but its not checking the helpless, seriously affect the business in brand building; some products, "according pounds Hedonic Price" in the commodity value chain, only 0.5% -1.0% normal profits, the real value of fastener products, but was seriously distorted, the industry lacks the necessary industry standards, business between the "lower price" can often see the phenomenon of mutual striving hard.
Nowadays, not so much the development of the fastener industry is facing bottleneck, but rather that we face is to promote change and promote development opportunities. In the "Twelve Five" period, we should strive to promote the fastener industry is the original transformation and upgrading of traditional industries, the product value chain from the high-end low-end extension to change to effectively promote the fastener industry driven by cost and other factors to innovation-driven change. Only by solving the fastener industry's "short-board effect," can have the opportunity to enhance the industrial competitiveness of the industry, access to new market space. How to break the fastener industry challenges and problems that truly need our in-depth study and exploration.
Ministry of Industry has issued the "Basic Mechanical parts industry revitalization plan", plans to 3 years of hard work, making the basis of major equipment spare parts suppliers in China to 70% of capacity. Encourage enterprises to cross-sectoral, cross-ownership mergers and acquisitions, efforts to form a number of internationally competitive, with annual sales of more than 50 billion of enterprise groups. Program implementation period for the 2010 -2012 year.
Mechanical parts based mainly refers to: bearings, gears, molds, hydraulic parts, pneumatic components, seals, fasteners, etc., is an indispensable component manufacturing equipment, in part, directly determines the host of major equipment and product performance, level of , quality and reliability.
"Options" through 3 years of hard work, focus on energy development, transportation, and new rural construction, preparation of new materials, energy saving and comprehensive utilization of resources and other areas of the field of construction equipment needed to make breakthroughs in key parts of the bottleneck.
A good news article, let us confidence that we have with the times, to face the challenges, and jointly promote the development of China's fastener industry continues to move forward.