The engine idling, step on the clutch pedal Although in the end, but the difficulties linked to files, change gear with percussion. After barely hanging files, not to relax the clutch pedal, the car has been exercised or flame.
Second, check:
Remove the clutch case back, the transmission link into the neutral gear, the clutch foot in the end. Then, struck with a screwdriver driven disc.brass bushing If you can easily steers, indicating a good clutch; if dial does not move, indicating incomplete separation of the clutch.
Third, the exclusion:
1, check the clutch pedal plain bearing free travel is too large, and adjust.
2, check whether the same high degree of separation lever, is too low.
Fork under the car struck the separation, the separation front-end gently against the separation of the bearing inner end surface of the lever, plasic bushing turning clutch a week view, if the separation of the inner end of the lever and simultaneously separate the bearing contact is not on, indicating Mould guide plate a high degree of separation lever inconsistent, should be adjusted.
If highly consistent with separation lever, still not completely separated, we must check the lever height. The separation will be transferred to the same high degree of leverage, if they can be completely separated, indicating that the original had very improperly DU bushing adjusted or worn. Lever to adjust the separation, you must re-adjust clutch pedal free travel.
3, if the adjustment to normal, still not completely separated, we must remove the clutch, check the driven plate is mounted against axial movement is difficult, the main driven plate without warping, separation lever screw is loose, floating pin is off.
4, for the riveting of the new friction plate clutch, to check whether the driven plate and the friction plate is too thick. If too thick, can be added between the clutch and flywheel cover gasket.
5, the hydraulic clutch, in addition to the above checks, you should also check whether the lack of brake fluid, hydraulic pipe exhaust system is leaking and the air.